Used to install BYE terminal program for C=128 CP/M system.

REQUIRED: C=128 CP/M (28 MAY 87), USQ (UNSQUEEZE) and the files
listed below.

; B5C8-2.INS - BYE5 insert for Commodore C128, external modem - 8/11/86
;
;          Note, this is an insert, not an overlay.
;          It will only work with BYE510 or higher.
;          When going through the options for
;          BYE5, set the clock speed:
;
;                 MHZ  EQU  1
;
;          The modem routines built into the Com-
;          modore IOS use "bit-banging" interrupt
;          control and this value should be used.
;          (All this does is control the number of
;          loops used for timing purposes.)
;
;-----------------------------------------------------------------------
; TO INSTALL:
;
; You will need the following files from BYE5nn.LBR to properly imple-
; ment BYE5 on your C128 which uses CP/M 3.0:
;
;     BYE5nn.AQM   - The BYE5 source file for CP/M 2 or CP/M 3
;     B5-CPM3.AQM  - CP/M Plus program renamed to BYE.COM during install
;     B5-DRIV3.AQM - BYE5 RSX driver program called internally by BYE
;               to initialize the CP/M Plus RSX
;
; You will need the following file from B5-CLOCK.LBR if you want to use
; the clock support provided in BYE5:
;
;     B5C-CPM3.IQS - CP/M Plus clock insert
;
; Configuration information for BYE5 is available in BYE5.DQC (from
; BYE5nn.LBR).     Additional CP/M Plus-specific information and generation
; instructions are in B5-CPM3.DQC (also from BYE5nn.LBR).
;
;                              - notes by George Peace
;
; =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =

crc32a = 1481272250 for "b5c8-2.iqs"

 +-------------------------------------------------------------------+
 |      thoot@neosoft.com   2600 Skywalker #1076 Houston 77058       |
 |   PIC of Midtown 713-961-5817 FIDO 1:106\31 voice 713-286-8717    |
 |                        GEnie THOOT  WB5HIG                        |
 +-------------------------------------------------------------------+